Heat Transfer Plate Identification

Heat transfer plate chevron / theta pattern

A plate heat exchanger is designed to give the best thermal efficiency, with a specific combination of high and low theta heat transfer plates. To maintain the correct duty it is very important that the same type of plates are used and are installed in the correct order. Each plate heat exchanger is supplied with a plate configuration sheet which contains all the relevant information for ordering spare parts and rebuilding the plate pack.

Heat transfer plates

Transition Plate Identification

Below is every combination of transition plate, found in multi-pass plate heat exchangers. Each manufacturer has their own numbering format, we have only detailed the most common.

  • Line 1 - HRS Heat Exchangers / Arsopi Thermal
  • Line 2 - Alfa Laval
  • Line 3 - APV / Funke / Sondex
 Heat Transfer Plates  Heat Transfer Plates  Heat Transfer Plates  Heat Transfer Plates  Heat Transfer Plates  Heat Transfer Plates  Heat Transfer Plates  Heat Transfer Plates

 

Addtional Resources

 

 

   UKAS ISO9001    Safe Contractor Approved    British Safety Council    British Safety Council    Constructionline    Reset    View HeatExchangerSpares.com profile on Ariba Discovery