Hot Water Packages
Hot water packages are found wherever domestic hot water is required e.g. Hotels, Leisure Centres, Hospitals
and offices.
Hot water packages vary from one manufacturer to the next but they all are based on the same principle:
A plate heat exchanger (PHE) is used to heat cold water typically from 15°C to 60°C, using primary
water at
80-90°C. A sensor monitors the secondary outlet temperature and controls it, via a control panel, with
an actuating valve on the primary flow. The primary and secondary flows will be pumped and the package may include
various alarms.
There are many different manufacturers of hot water packages and it is not always clear which model of PHE has
been fitted. HeatExchangerSpares.com can identify the type of PHE fitted for you and provide a quotation for any
spare parts and servicing required. By sourcing the parts through our global supply chain we can keep prices competitive
and lead times to a minimum.
|
Equipment: |
Fully programable with PID control |
|
|
Basic with only DHW setpoint |
|
|
Primary Pump - Double or Single Head |
|
|
Secondary Pump - Double or Single Head |
|
|
Control Valve & Actuator |
|
|
Temperature Sensor |
|
|
High Temperature Safety Sensor |
|
|
Pressure Relief Valve |
Heat Exchanger Frames
|
Frame Types: |
Industrial Painted Frames – Various Colours |
|
Flow Type: |
Most models parallel flow |
|
Connection Types: |
Usually male BSP threaded |
Heat Exchanger Gaskets
|
Gasket Type: |
Clip & Glue type |
|
Gasket Material: |
NBR |
|
|
EPDM |
|
|
Other material available on request |
Heat Transfer Plates
|
Chevron Pattern: |
Most plate models available in High and low Theta patterns |
|
Plate Material: |
316 Stainless Steel |
|
|
304 Stainless Steel |
|
|
Other material available on request |
Plate Heat Exchanger
Servicing
|
Spare Parts: |
Plate Heat Exchanger Gaskets |
|
|
Plate Heat Transfer Plates |
|
|
Pumps, Control Valves, & Sensors etc. |
|
|
Frame Liners & Port Rings |
|
|
Frame Parts, Tie Bolts & Carrier Bars |
|
On Site Servicing: |
Complete Heat Exchanger service including pressure testing |
|
Off Site Servicing: |
Clean, test and re-gasket of
plate packs |
|
|
Overhaul of complete Plate Heat Exchanger including pressure test |
|
|
Collection of plate packs or
Plate Heat Exchangers from site |
|
New Equipment: |
Supply and installation of identical Plate Heat Exchangers |
|
Site Survey: |
Free site survey of your plate
heat exchangers available on request. |
Addtional Resources